Marble Breaks and Bases
  *Countersunk refer to a stepped hole on bottom of base to allow for lamp           pole hardware not to interfere with bottom of base.
**Wire way is a slot or hole for the wire to exit the base.
ROUND MARBLE BASE
Black with White Veins
Height 1"
Center Hole Slips 1/4 IPS*

                                 Countersunk
without Wire Way**       with Wire Way**
D02-18-30     6"                    
D02-18-40     7"                 D02-18-41*       7"

* limited Quanities Discontinued
H264-1
Round Black Zebra Marble Base 7/16 Inch Center Hole, 3/4 Inch Thick Polished Smooth, Countersunk Bottom Hole .40 Inch Deep X 1.5 Inch Diameter, With 5/16 Inch Diameter Wire Way. Edges Not Rounded-Crisp 90 Degree Angles

                                   Top                                        Diameter
B02-B4322B              5"
B02-B4323B              6"
Round White Marble Base
7/16 Inch Center Hole, 3/4 Inch Thick Polished Smooth, Countersunk Bottom Hole .40 Inch Deep X 1.5 Inch Diameter, With 5/16 Inch Diameter Wire Way. Edges Not Rounded-Crisp 90 Degree Angles

                                 Top                                                                 Diameter

B02-B4322W            5"
B02-B4323W            6"
SQUARE MARBLE BASE
White with Black Veins
Height 3/4"
Center Hole Slips 1/8 IPS
Countersunk*
Without Wire Way
                              Top Square
                                Diameter
B02-B4310                  3 x 3"

With wireway
B02-B4311                  5 x 5"
B02-B4312                  6 x 6"
SQUARE MARBLE and BRASS BASE
White with Black Veins
Height approximately 2 1/4"
3" Top 5" Bottom
Center Hole Slips 1/8 IPS
Countersunk* with Wire Way**

B02-B0002
This page was last updated: March 9, 2018
Page
Best if viewed with 1024 resolution!!!!
Rands Creative Creations   Harold Rand Enterprises
3729 Freeman Rd Jacksonville FL 32207
Ph 904 398 7925
[email protected]